Quick view Details Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers MSRP: Now: $15.99 Add to Cart Compare Quick view Details sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles MSRP: Now: $5.00 Add to Cart Compare Quick view Details Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool MSRP: Now: $13.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view Details sku: TOOL-TC1 LCR-TC1 Multi-Function Tester MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver MSRP: Now: $4.25 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles MSRP: Now: $5.00 Add to Cart Compare Quick view Details Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool MSRP: Now: $13.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view Details sku: TOOL-TC1 LCR-TC1 Multi-Function Tester MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver MSRP: Now: $4.25 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool MSRP: Now: $13.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view Details sku: TOOL-TC1 LCR-TC1 Multi-Function Tester MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver MSRP: Now: $4.25 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare
Quick view Details sku: TOOL-TC1 LCR-TC1 Multi-Function Tester MSRP: Now: $25.00 Add to Cart Compare Quick view Details sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver MSRP: Now: $4.25 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver MSRP: Now: $4.25 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare
Quick view Details Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters MSRP: Now: $7.60 Add to Cart Compare Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver MSRP: Now: $6.50 Choose Options Compare Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare
Quick view Details Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft MSRP: Now: $8.45 Choose Options Compare Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Hakko - CHP | sku: TOOL-TWEEZER- Tweezers MSRP: Now: $8.75 Choose Options Compare Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Truetone | sku: PSU-MAM 1 SPOT mA Meter MSRP: Now: $32.99 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes MSRP: Now: $59.00 Choose Options Compare Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool MSRP: Now: $41.50 Add to Cart Compare Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details sku: TOOL-Wrench Allen Wrench MSRP: Now: $1.00 Choose Options Compare Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 MSRP: Now: $10.50 Add to Cart Compare Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers MSRP: Now: $15.95 Add to Cart Compare Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station MSRP: Now: $124.87 Add to Cart Compare Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool MSRP: Now: $105.00 Add to Cart Compare Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Details CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser MSRP: Now: $35.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Pepers' Pedals | sku: TOOL-Rocket-Sockets Rocket Sockets - Plastic Nut Drivers Super sturdy reinforced nylon nut drivers for tightening nuts on pedals, guitar, amps, and other projects that you don't want to scratch up! Comfortable winged grip. Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest... MSRP: Now: $15.99 Add to Cart Compare Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view sku: TOOL-Desoldering Needles Stainless Steel Desoldering Needles A cheap and easy tool for desoldering through hole components! Match the needle size to the PCB hole, hold in on the component lead, heat up the solder, push, and let the solder cool. You'll have nice clean holes because solder doesn't stick to stainless... MSRP: Now: $5.00 Add to Cart Compare Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Pepers' Pedals | sku: TOOL-BetterSetter Better Setter - Knob Alignment Tool Get those out of control controls UNDER CONTROL!! Aptly named Better Setter, this tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. Invented by Tony of Pepers' Pedals, the same folks that... MSRP: Now: $13.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view CopperSound DIY | sku: TOOL-CS-BREADBOARD Breadboard - Coppersound DIY ALL SIZES INCLUDE A FREE BUNDLE OF JUMPER WIRES! Integrated breadboards that are convenient and simple for prototyping! These breadboards come integrated with audio jacks, power jack, bypass switch, and status LED. Along with pin headers to easily... MSRP: Was: Now: $29.00 - $99.00 Choose Options Compare
Quick view sku: TOOL-TC1 LCR-TC1 Multi-Function Tester A great little multi-function component tester! Drop the component and hit start and it will automatically recognize the type of component and give a few measurements. -Self test with automatic calibration-1/8" color display-Diode Range: less than 4... MSRP: Now: $25.00 Add to Cart Compare Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view sku: TOOL-MiniScrewdriver Lutz 4-in-1 Mini Pocket Screwdriver The perfect mini screwdriver for set screws on knobs, trim pots, and other little screwdriver applications! Included tools:-1/16" flat head-3/32" flat head-Phillips No. 0 -Phillips No. 000 MSRP: Now: $4.25 Add to Cart Compare Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Cusack Music | sku: TOOL-HaS Hold-a-Socket | Rocket Socket Stand A convenient stand for your Rocket Sockets! We 3D print these in-house and have them all over the place at Cusack Manufacturing to keep workbenches organized and efficient! We figured that you might find them handy, too! Keeps your sockets... MSRP: Was: Now: $14.00 - $15.00 Choose Options Compare
Quick view Hakko - CHP | sku: TOOL-CUT-CHP170 Angled Side Cutters Angled cutters for snipping component legs and copper wire. Spring loaded to stay open. This side cutter is a high quality tool that we use every day. They are found on every builders' work bench here at Cusack Manufacturing. Hakko C.H.P... MSRP: Now: $7.60 Add to Cart Compare Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Cusack Music | sku: TOOL-turn-a-screw Turn-a-Screw 6-in-1 Screwdriver Rugged 6-in-1 tool for tons of pedal applications, and just a handy tool for a variety of everyday projects in general. Tools inlcuded: 1/4" Slotted Bit 3/16" Slotted Bit #1 Phillips #2 Phillips 1/4" Nut Driver 5/16" Nut Driver MSRP: Now: $6.50 Choose Options Compare Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view CopperSound DIY | sku: TOOL-CS-AB- Adapter Board for Breadboards CopperSound DIY Adapter Boards! The perfect way for utilizing switches and and dual gang pots with standard breadboards. A great addition to a CopperSound DIY Breadboard! Choose from five options: Dual Gang Potentiometer (Kit only. NO pot... MSRP: Was: Now: $5.00 - $10.00 Choose Options Compare
Quick view Quick Braid | sku: TOOL-BRAID Desoldering Wick / Braid - 10ft Copper desoldering braid. Rosin-coated copper for quick solder wicking. .05" or .1" wide braid. 10ft length in anti-static spool. MSRP: Now: $8.45 Choose Options Compare Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Hakko - CHP | sku: TOOL-TWEEZER- Tweezers Tweezers! A big (little) helping hand for grabbing and moving small parts around in small places. Choose straight OR curved tip. Made out of stainless steel. These models of tweezers are high quality tools that our builders use... MSRP: Now: $8.75 Choose Options Compare Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Truetone | sku: PSU-MAM 1 SPOT mA Meter Know the current draw of your builds! We love using the mA Meter at both StompBoxParts and Cusack Manufacturing! The 1 Spot mA Meter makes it as easy as it can be to measure the current draw of any pedal. No need for breadboard and multimeters, or... MSRP: Now: $32.99 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view CopperSound DIY | sku: TOOL-CS-SUB Component Substitution Boxes The CopperSound Component Substitution Boxes are a series of useful and intuitive tools to help designers easily and effortlessly select between different component values without the need to constantly remove and replace different values when trying to... MSRP: Now: $59.00 Choose Options Compare Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Kester | sku: SOLDER-LEAD-031 Solder - Leaded - No-Clean .031" - 1lb Spool USA CUSTOMERS ONLY. WILL NOT SHIP OUTSIDE USA. If you are outside of the USA it will be removed from order without notice. Leaded, "no-clean" solder. .031" (.8mm) diameter.1lb spool. Alloy: Sn63 Pb37 3.3% Kester 245 Flux Kester p/n:... MSRP: Now: $41.50 Add to Cart Compare Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view sku: TOOL-Wrench Allen Wrench Allen wrench (aka hex key) for knobs with hex head set screws. Also useful for guitar bridges! 1.5mm and 2mm sizes. MSRP: Now: $1.00 Choose Options Compare Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view sku: TOOL-HS0531 Soldering Iron Tip - Spoon - HS0531 Our favorite soldering iron tip around the shop! What we like about this tip is it is great for general purpose thru-hole soldering, SMT work, and re-work. It holds a small amount of solder in the "spoon" like shape which helps maintain temperature, flow... MSRP: Now: $10.50 Add to Cart Compare Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Hakko - CHP | sku: TOOL-CUT-CSP301 Wire Strippers Wire strippers for 20-30awg wire. Gripped plier tip and lower cutters. Spring loaded to stay open. Hakko C.H.P CSP-30-1Made in Italy. MSRP: Now: $15.95 Add to Cart Compare Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Hakko | sku: TOOL-FX888DX-010BY FX-888DX Soldering Station FREE SHIPPING IN THE USA! *Exempt from FedEx 2 Day shipping method due to size. If you choose FedEx 2 Day the shipping method will be changed without notice* An industry standard and our favorite soldering station! The Hakko FX888DX can... MSRP: Now: $124.87 Add to Cart Compare Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view Kester | sku: SOLDER-RoHS-031 Solder - Lead-Free No-Clean .031" - 1lb Spool Lead free, RoHS compliant, "no-clean" solder. This is our go-to roll of solder for hand soldering here at Cusack Manufacturing. .031" (.8mm) diameter.1lb spool. Alloy: Sn96.5 Ag3.0 Cu0.5 2.2% Kester 275 Flux Kester p/n: 24-7068-7601 MSRP: Now: $105.00 Add to Cart Compare Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected
Quick view CopperSound DIY | sku: TOOL-CS-SDKit Solder Dispenser The Coppersound DIY Solder Dispenser is unique tool to hold rolls of solder! Built solely out of a pedal enclosure and hardware. These come with all included parts, along with an assembly diagram. *SOLDER NOT INCLUDED* MSRP: Now: $35.00 Add to Cart Compare Compare Selected
